1000BASE-T1 MediaConverter EMC

1000Base-T1和光信号之间全双工物理层转换

Description描述

The 1000BASE-T1 EMC Converter is especially designed for measurements within the EMC chamber. It is delivered in a Set with an adapter board which enables internal PHY status readings and provides one point-to-point connection between Automotive Gigabit Ethernet and SFP Gigabit Ethernet, with which optical fibre modules are used.
1000BASE-T1 EMC转换器专为EMC暗室测量而设计。它以套件形式提供,有一个适配板可实现内部PHY状态读取,并实现车载千兆以太网和使用光纤SFP模块的千兆以太网之间实现点对点通信。

The device provides an SFP Port to connect a standard Ethernet RJ45 module or to use an optical Gigabit Ethernet SFP Module.
该设备提供SFP端口以连接标准以太网RJ45模块或光纤千兆以太网SFP模块。

No packages are stored or modified within the device. The process is a direct physical layer conversion, where the hardware was especially developed and optimized to provide the best possible EMC behavior.
设备中不存储或修改任何包。该过程是直接的物理层转换,其中硬件经过特别开发和优化,以提供最佳的EMC性能。

Thus, the 1000BASE-T1 Converter EMC is the ideal solution for working quickly and efficiently with the new 1000BASE-T1 technology, and it is the ideal device to perform EMC test through the optical interface.
因此,1000BASE-T1转换器EMC是使用新型1000BASE-T1技术快速高效工作的理想解决方案,是通过光学接口执行EMC测试的理想设备。

Features 产品特点
  • Converts IEEE 1000BASE-T1 full duplex to Gigabit Ethernet (1000BASE-T or optical Ethernet)
    将1000BASE-T1全双工转换至千兆以太网(1000BASE-T或光纤)
  • Master/slave configuratio
    主/从 配置
  • Configuration DIP switches
    DIP配置开关
  • Status LEDs
    状态灯
  • SFP Module allows optical Ethernet connection or standard Gigabit Ethernet through RJ45 Connector
    SPF模块可以实现光纤以太网和使用RJ45接口的标准千兆以太网
  • Allows to perform EMC test through the optical interface
    可通过光纤接口实现EMC测试
  • Automotive MateNET connector and cables included (Power, 1000BASE-T1)
  • Stainless steel housing
    不锈钢外壳
  • Power supply: 10 to 13 Vold DC (nominal 12 Volt DC),
    供电:10-13伏直流,
  • power consumption: 3 Watt
    功率:3 Watt
  • Size: 95 x 95 x 32mm
    尺寸:95 x 95 x 32 毫米